Real estate utility · Material estimator

Preliminary construction material estimator.

Explore illustrative quantities for cement, steel, sand, aggregates, masonry and finishes. Adjust rates and wastage assumptions; obtain an engineer-reviewed quantity takeoff before procurement.

Illustrative preview · your entries determine results

01 Set your assumptions02 Review the details03 Keep the qualification with the result

Starting entries are illustrative examples. Replace them with your own records or dated quotations. They are not verified project, property, owner or legal facts.

Loading material quantity estimator...

Real estate utility · Material estimator

Preliminary construction material estimator.

Explore illustrative quantities for cement, steel, sand, aggregates, masonry and finishes. Adjust rates and wastage assumptions; obtain an engineer-reviewed quantity takeoff before procurement.

Illustrative preview · your entries determine results

01 Set your assumptions02 Review the details03 Keep the qualification with the result

Starting entries are illustrative examples. Replace them with your own records or dated quotations. They are not verified project, property, owner or legal facts.

Illustrative inputs, not market quotes. Amounts are in Indian rupees (INR). Results update as you enter valid values.

Preliminary Material Quantity Estimator

Whole-building model for 100–10,000,000 sq.ft. Quantities include wastage; units are independently rounded approximations. Illustrative rates only. Obtain a professional quantity takeoff.

Total Built-Up Area (sq.ft.)

Floors Configuration

Vertical structural columns & slabs

Concrete Scenario (not a mix design)

M25 model coefficientsIllustrative presetM20 model coefficientsIllustrative preset

Model presets are not an approved concrete mix design.

Wall Masonry Material

Red Clay BrickWire-cut / KilnAAC BlocksLightweight / Fast

Choose the model material; verify suitability with your engineer.

Total Material Outlay

₹19.91 Lakh

₹19,90,590 raw materials

Material Cost / Sq.Ft.

₹995 /sq.ft.

Materials only; excludes labour, equipment and professional fees.

Structural-category materials

₹13.97 Lakh

Steel (8.32 MT) + Cement (1599 bags)

Estimated Concrete Volume

84 m³

~2,966 cft of M25 concrete

Material Item	Category	Quantity incl. wastage	Approx. secondary unit	Wastage %	Indicative Rate	Estimated Total	Estimation Basis
Steel Reinforcement (TMT Fe-550D Rebars)	structural	8.32 Metric Tonnes	8,320 kg	4%	₹62,000	₹5,15,840	Estimated at ~4.0 kg per sq.ft. of built-up area (4% cut-waste included). Standard 8mm to 25mm structural rebar schedule.
Cement (OPC 53 / PPC Grade)	structural	1,599 Bags (50 kg)	80 Tonnes	3%	₹380	₹6,07,620	Aggregated requirement: 907 bags for RCC, 528 for plastering, 48 for masonry, and 70 for tile bedding.
Sand (M-Sand for Concrete & P-Sand for Plaster)	structural	105.7 Tonnes	23.3 Brass (100 cft)	8%	₹1,400	₹1,47,980	Concrete fine aggregate + masonry & plastering sand. Equivalent to ~23.3 Brass (2,333 cft).
Coarse Aggregate (10mm & 20mm Jelly)	structural	114.2 Tonnes	26 Brass (100 cft)	5%	₹1,100	₹1,25,620	Machine crushed granite aggregate for RCC foundations, columns, beams, and slabs. Equivalent to ~26 Brass.
Red Clay Kiln Bricks (9" & 4.5" Walls)	masonry	40,280 Bricks (Nos)	—	6%	₹11	₹4,43,080	Estimated at ~19 bricks per sq.ft. of built-up area for external 9" perimeter walls and internal 4.5" partitions.
Flooring & Bathroom Wall Tiles	finishing	1,836 sq.ft.	—	8%	₹65	₹1,19,340	Living, bedroom, and kitchen vitrified tiles plus ceramic bathroom dado up to 7 ft with 8% cutting & layout wastage.
Polymer Wall Putty (2 Coats)	finishing	9 Bags (40 kg)	—	5%	₹850	₹7,650	Base surface preparation over plastered walls. Illustrative coverage: 1 bag (40 kg) per ~540 sq.ft. of paint area, plus 5% allowance; rounded up to whole purchase bags.
Interior & Exterior Emulsion Paint (with Primer)	finishing	69 Litres	—	6%	₹340	₹23,460	1 coat acrylic primer and 2 coats premium emulsion paint over ~4,400 sq.ft. of internal and external wall area.

Two entered area scenarios

Optional: enter a lower and upper built-up area using the same floors, material choices, rates and allowances above. These are two scenarios you choose, not a confidence interval, design tolerance or guaranteed quantity range.

Lower area scenario (sq.ft.)Upper area scenario (sq.ft.)

Procurement & Quality Control Advisories

✓Plan procurement and storage against the engineer-approved schedule and manufacturer instructions. Preset rates are not supplier quotations.

✓Confirm reinforcement grade, dimensions, test records and required certification against the structural design before ordering.

✓Obtain project-specific sand quality, grading and test requirements from the responsible engineer; no universal silt threshold is established by this tool.

✓Aggregate size and blend depend on the approved mix design and quality tests. Do not procure a blend solely from this preliminary estimate.

Quantities from your takeoff

Use specific dimensions or a supplied schedule for these separate quantity scenarios. They do not design a safe structure, prescribe a mix or establish procurement quantities. Each complete scenario can be saved; reports include completed scenarios and omit incomplete ones.

Concrete volume scenario

Entered net slab area × entered thickness. Deduct openings in your area input. Beams, drops and structural design are excluded; the allowance is your scenario, not a delivery or engineering recommendation.

Brickwork module count

Approximate volume method using your nominal module dimensions including joints. Whole installed units round up first; the extra allowance then rounds up to whole purchase units. This does not lay out courses, bonds, cuts or structural wall design.

Cement and sand mortar quantities

Uses your wet-volume takeoff, dry-volume multiplier, volume mix parts, bulk density and bag mass. No mix ratio, conversion factor or density is prescribed. Cement purchase bags round up; sand volume remains an approximate calculated quantity. Obtain a project-specific mix and takeoff.

Reinforcement schedule quantities

Theoretical cylindrical mass from your bar schedule and supplied density. Cut length must already include any scheduled laps/hooks/bends; this tool does not design their size, spacing or reinforcement. Uses π =3.14159265358979323846 for the cylinder calculation; actual supplied mass can differ.

Loading material quantity estimator...

Illustrative inputs, not market quotes. Amounts are in Indian rupees (INR). Results update as you enter valid values.

Preliminary Material Quantity Estimator

Whole-building model for 100–10,000,000 sq.ft. Quantities include wastage; units are independently rounded approximations. Illustrative rates only. Obtain a professional quantity takeoff.

Total Built-Up Area (sq.ft.)

Floors Configuration

Vertical structural columns & slabs

Concrete Scenario (not a mix design)

M25 model coefficientsIllustrative presetM20 model coefficientsIllustrative preset

Model presets are not an approved concrete mix design.

Wall Masonry Material

Red Clay BrickWire-cut / KilnAAC BlocksLightweight / Fast

Choose the model material; verify suitability with your engineer.

Total Material Outlay

₹19.91 Lakh

₹19,90,590 raw materials

Material Cost / Sq.Ft.

₹995 /sq.ft.

Materials only; excludes labour, equipment and professional fees.

Structural-category materials

₹13.97 Lakh

Steel (8.32 MT) + Cement (1599 bags)

Estimated Concrete Volume

84 m³

~2,966 cft of M25 concrete

Material Item	Category	Quantity incl. wastage	Approx. secondary unit	Wastage %	Indicative Rate	Estimated Total	Estimation Basis
Steel Reinforcement (TMT Fe-550D Rebars)	structural	8.32 Metric Tonnes	8,320 kg	4%	₹62,000	₹5,15,840	Estimated at ~4.0 kg per sq.ft. of built-up area (4% cut-waste included). Standard 8mm to 25mm structural rebar schedule.
Cement (OPC 53 / PPC Grade)	structural	1,599 Bags (50 kg)	80 Tonnes	3%	₹380	₹6,07,620	Aggregated requirement: 907 bags for RCC, 528 for plastering, 48 for masonry, and 70 for tile bedding.
Sand (M-Sand for Concrete & P-Sand for Plaster)	structural	105.7 Tonnes	23.3 Brass (100 cft)	8%	₹1,400	₹1,47,980	Concrete fine aggregate + masonry & plastering sand. Equivalent to ~23.3 Brass (2,333 cft).
Coarse Aggregate (10mm & 20mm Jelly)	structural	114.2 Tonnes	26 Brass (100 cft)	5%	₹1,100	₹1,25,620	Machine crushed granite aggregate for RCC foundations, columns, beams, and slabs. Equivalent to ~26 Brass.
Red Clay Kiln Bricks (9" & 4.5" Walls)	masonry	40,280 Bricks (Nos)	—	6%	₹11	₹4,43,080	Estimated at ~19 bricks per sq.ft. of built-up area for external 9" perimeter walls and internal 4.5" partitions.
Flooring & Bathroom Wall Tiles	finishing	1,836 sq.ft.	—	8%	₹65	₹1,19,340	Living, bedroom, and kitchen vitrified tiles plus ceramic bathroom dado up to 7 ft with 8% cutting & layout wastage.
Polymer Wall Putty (2 Coats)	finishing	9 Bags (40 kg)	—	5%	₹850	₹7,650	Base surface preparation over plastered walls. Illustrative coverage: 1 bag (40 kg) per ~540 sq.ft. of paint area, plus 5% allowance; rounded up to whole purchase bags.
Interior & Exterior Emulsion Paint (with Primer)	finishing	69 Litres	—	6%	₹340	₹23,460	1 coat acrylic primer and 2 coats premium emulsion paint over ~4,400 sq.ft. of internal and external wall area.

Two entered area scenarios

Lower area scenario (sq.ft.)Upper area scenario (sq.ft.)

Procurement & Quality Control Advisories

✓Plan procurement and storage against the engineer-approved schedule and manufacturer instructions. Preset rates are not supplier quotations.

✓Confirm reinforcement grade, dimensions, test records and required certification against the structural design before ordering.

✓Obtain project-specific sand quality, grading and test requirements from the responsible engineer; no universal silt threshold is established by this tool.

✓Aggregate size and blend depend on the approved mix design and quality tests. Do not procure a blend solely from this preliminary estimate.

Preliminary construction material estimator.

Preliminary construction material estimator.

Preliminary material planning snapshot

Preliminary Material Quantity Estimator

Two entered area scenarios

Procurement & Quality Control Advisories

Quantities from your takeoff

Concrete volume scenario

Brickwork module count

Cement and sand mortar quantities

Reinforcement schedule quantities

Preliminary material planning snapshot

Preliminary Material Quantity Estimator

Two entered area scenarios

Procurement & Quality Control Advisories

Quantities from your takeoff

Concrete volume scenario

Brickwork module count

Cement and sand mortar quantities

Reinforcement schedule quantities